Hard drives are sometimes nearly silent however some do build a muted clicking sound once they are being accessed or turned off — this is completely normal.
On the other hand, if you begin hearing noises only sometimes or hard drive making noise that you have never detected before — like clicking, grinding, vibrations, or screaky — your hard drive may be failing. Over at Data Centre, some sample sounds of failing arduous drives that may sound like what you are hearing.
Troubleshooting steps to fix hard drive noise
- The steps below can help you confirm if it’s only the hard drive that is failing and if it’s the hard drive making buzzing noise, what to try and do next before all of your precious data is gone permanently.
- This troubleshooting might take anywhere from 15 minutes to a couple of hours, depending on the reason behind the hard drive noise.
- The very first thing you ought to do is confirm the hard drive is that the actual cause of the noise and not a different hardware component.
- For example, if you disconnect the power and data cables from the hard drive however you continue to hear the noise once you boot up the PC, it’s clear that the problem isn’t with the hard drive.
- On the other hand, it is important to try each situation to essentially pinpoint the supply. If the noise is gone once the power cable is plugged in but returns after you attach the data cable to the hard drive, then you almost certainly ought to replace the data cable.
- If you are sure the hard drive itself is at fault, run free hard drive diagnostic software system, already accessible on several computers or accessible on the internet. The more advanced diagnostic software is additionally accessible for a price from third-party software developers.
When running diagnostics software, it is best to shut down all the different programs and disconnect the other drives or devices that you are not testing so the results will not be inclined.
At best, the diagnostic software system will only mark the areas of the hard drive that are failing as “bad” and stop the pc from using them in the future. It will not actually fix a hard drive that is physically failing.
If any corrections created by the diagnostics software system do not briefly solve the hard drive noise, do an entire backup of your system and replace the hard drive immediately.
If the diagnostics software system helps fix the click, grinding, or screaky noises, keep in mind that this is often only a short-lived resolution. If the hard drive makes a grinding noise chances are high that, the hard drive can still fail till it’s fully unusable.
The permanent solution is to try to do an entire backup of your system and replace the hard drive as quickly as possible.
If your hard drive is still creating noise, it suggests that it’s high-powered on. However, you may not be able to boot to the operating system to use your files usually. So try to replace your hard drive to get a permanent solution.